I posted a silly TikTok with our DIY carwash and several friends wanted to know how to make their own! I originally did this a couple of years ago when I was first getting into photography and absolutely loved the way the photos turned out. It’s a super fun mini session to offer during the summer months, and fun for all the kiddos. It’s not super expensive, and right now when it’s hard to find a pool filter…it’s a great way to be able to enjoy going outside.

Supply List:

• (9) 1″ elbows
• (7) 1″ tees
• (2) 1″ crosses
• PVC Hose Adapter
• (20) 1×30″ pipe
• (3) 1×37″ pipe

Making the Frame:

• Lay two of the 30″ pipes on each side (parallel to each other, using 4 pieces of 30in pipe so far). You will then connect the pieces with tees in the middle.
• You will put elbows on the ends of three pipes, and a tee on one end. The tee is what you will connect your PVC Hose Adapter to later.
• Once connected, add 6 of the 30in pipes vertically (three on each side). In the front and back of your car wash frame, put a tee on each of the vertical 30in PVC pipes.
• You can go ahead and add the cross sections in the middle vertical pieces if that makes it easier.
• In the front and back of the carwash fram, add 4 pieces of 30in pipe vertically and use a tee and a 37″ pipe horizontally to connect them at the top. This will complete almost everything but the middle section of your frame. For your cross fittings, you will put them in the middle section of the car wash on both sides (if you haven’t already, I waited until this step).
• Once you have the cross fitting on each side, add two 30in pipes on each side of the car wash to connect the sides laterally (four pieces in total).
• Add 30in pipes on both sides vertically (middle section only, so 2 peices), and use an elbow on each pipe to connect the 37in pipe at the top. This will complete the middle section of the frame.

How to get the water to flow:

You are going to drill holes about 1in apart (this does not have to be exact). We used a 1/16 drill bit to make the holes. Attach a standard water hose to the front of the car wash by using a PVC hose adapter connected to a tee.

Completing your Car Wash:

Gather up pool noodles, sponges, plastic streamers, etc. I grabbed little spray bottles from Target that were about a dollar. I got them from the Beauty section one year in bright colors. I got sponges from the dollar store and hung them from the car wash. Pool Noodles can be combine with streamers so that you don’t have to purchase as many noodles. Another suggestion for truly making this a DIY project is cutting floats that have holes in them to make plastic strips. You can also use plastic table cloths to make your streamers. Just cut them into pieces. We also used a leaf blower as a “dryer” for our car wash at one point, ha. 

Have Fun:

Grab your scooter, coop car, box car, or just run through the car wash like a sprinkler! Wash your cars with sponges. Bring on your best pretend play! This will occupy your kids for hours! Splash in puddles, grab rain boots. The possibilities are endless with this DIY summer hack!

Optional Ideas:

Make a sign in front of your car wash and teach your kids about running a business. Talk to them about what is going on in the world right now and how being resourceful is necessary.  I like to use everything as a fun learning opportunity!

Let me know if you found this helpful. Feel free to follow along for more DIY hacks, budgeting tips, parenting reads, and more. I post daily on IG also. @ashleeleighann

-The Zombie Mom