pool

How to Make a DIY Car Wash this Summer for Super Cheap

DIY, Motherhood

316234_154034104779051_1934471763_n

I posted a silly TikTok with our DIY carwash and several friends wanted to know how to make their own! I originally did this a couple of years ago when I was first getting into photography and absolutely loved the way the photos turned out. It’s a super fun mini session to offer during the summer months, and fun for all the kiddos. It’s not super expensive, and right now when it’s hard to find a pool filter…it’s a great way to be able to enjoy going outside.

Supply List:

  • (9) 1″ elbows
  • (7) 1″ tees
  • (2) 1″ crosses
  • PVC Hose Adapter
  • (20) 1×30″ pipe
  • (3) 1×37″ pipe

Making the Frame:

  • Lay two of the 30″ pipes on each side (parallel to each other, using 4 pieces of 30in pipe so far). You will then connect the pieces with tees in the middle.
  • You will put elbows on the ends of three pipes, and a tee on one end. The tee is what you will connect your PVC Hose Adapter to later.
  • Once connected, add 6 of the 30in pipes vertically (three on each side). In the front and back of your car wash frame, put a tee on each of the vertical 30in PVC pipes.
  • You can go ahead and add the cross sections in the middle vertical pieces if that makes it easier.
  • In the front and back of the carwash fram, add 4 pieces of 30in pipe vertically and use a tee and a 37″ pipe horizontally to connect them at the top. This will complete almost everything but the middle section of your frame. For your cross fittings, you will put them in the middle section of the car wash on both sides (if you haven’t already, I waited until this step).
  • Once you have the cross fitting on each side, add two 30in pipes on each side of the car wash to connect the sides laterally (four pieces in total).
  • Add 30in pipes on both sides vertically (middle section only, so 2 peices), and use an elbow on each pipe to connect the 37in pipe at the top. This will complete the middle section of the frame.IMG_8436

How to get the water to flow:

You are going to drill holes about 1in apart (this does not have to be exact). We used a 1/16 drill bit to make the holes. Attach a standard water hose to the front of the car wash by using a PVC hose adapter connected to a tee.

Completing your Car Wash:

Gather up pool noodles, sponges, plastic streamers, etc. I grabbed little spray bottles from Target that were about a dollar. I got them from the Beauty section one year in bright colors. I got sponges from the dollar store and hung them from the car wash. Pool Noodles can be combine with streamers so that you don’t have to purchase as many noodles. Another suggestion for truly making this a DIY project is cutting floats that have holes in them to make plastic strips. You can also use plastic table cloths to make your streamers. Just cut them into pieces. We also used a leaf blower as a “dryer” for our car wash at one point, ha. 

Have Fun:

Grab your scooter, coop car, box car, or just run through the car wash like a sprinkler! Wash your cars with sponges. Bring on your best pretend play! This will occupy your kids for hours! Splash in puddles, grab rain boots. The possibilities are endless with this DIY summer hack!

Optional Ideas:

Make a sign in front of your car wash and teach your kids about running a business. Talk to them about what is going on in the world right now and how being resourceful is necessary.  I like to use everything as a fun learning opportunity!

Let me know if you found this helpful. Feel free to follow along for more DIY hacks, budgeting tips, parenting reads, and more. I post daily on IG also. @ashleeleighann

-The Zombie Mom

 

 

Advertisement

How to Make a Super Fun Summer Obstacle Course for Cheap!

DIY, Lifestyle, Mom Life, Motherhood

If this is your first time here, Welcome! I’m a mom of four girls who works night shift as a laboratory scientist. I homeschool my girls during the day, and I’m constantly trying to come up with new ideas to stay awake all day (while showing my girls the beauty in life). Corona has us all going a little crazy cooped up in the house, right? I planned to blow up the girls’ unicorn sprinkler and let them run around in the front yard, but it had a hole in it. It was way too hot to have a day outside without water so we improvised (which always does end up in the best day ever in my experience).

When we purchased our house, our realtor brought us over a moon bounce the next day!   There were five kids, infant to age 8 so to make this day fun for everyone would take a little work. Most of what I used were just items that we had in the garage. We had a smaller moon bounce/inflatable that served to keep the younger kids occupied while the older kids completed the course. The smaller inflatable was purchased second hand for super cheap.

While the moon bounce was a fun touch, it’s really not needed. This was the end of the course, and everything else leading up to it would have been enough. Here is what I used! Let’s get started!

Toys Used:

  • Two Peppa Pig Trikes (obviously don’t have to be peppa, but the trikes being small made it harder to peddle haha)
  • Hula Hoops
  • Kiddie Pool
  • Baseball and Bat
  • Pop up tent/tunnel
  • Bubbles
  • Water
  • DIY slip and slide (instructions provided)
  • Two Inflatables

Rundown of the Obstacle Course: First, the girls each had to peddle on the tiny trikes to the hula hoops. Once they picked up the hula hoops, they had to hula to the pineapple float (these fun floats were purchased from Target for about $3, I had a Flamingo also). Next, they had to slide down the slip and slide, crawl through the tunnel (pop up tent) and run to the kiddie pool. Once in the kiddie pool, they threw a ball in the air and hit it with the baseball bat. The final task was to run to the moon bounce, and climb to the top of the “wall” in the middle.

Tip: I added water, soap, and bubbles inside of the moon bounce so that it made it harder to get to the top at the end!

 

How I made the slip and slide: You can made this with any thick plastic. I used an old inflatable ball pit that had a hole. I cut it, spread it out, and we put two plastic stakes to hold the plastic in place. You can obviously make this bigger, but since it was just part of the obstacle course, it was the perfect size. You could use old pool floats and if you don’t have anything laying around, a hardware store sells rolls of thick plastic. Another tip to make it extra slippery would be to add dish soap.

Mom Tip: I like to make everything a “game” or “challenge” to keep my oldest interested. It didn’t really matter who finished the obstacle course first, but giving her tasks to complete is also a learning experience. Having ADHD myself, I know how engaging challenges can be and how I can let time slip away from me quickly without even realizing it. Escape Rooms and Obstacle Courses are along the same lines as video games and I have found this extremely effective when learning new topics.

Let me know if you found this helpful! Feel free to follow along for more DIY, life hacks, mom life, mental health, fitness tips and everything in between. 

-The Zombie Mom